Guide to install Android 10 [One UI 2 Beta]update on Galaxy S9+ and S9

0
20
Galaxy S9 One UI 2

After liberating the Android 10 beta update for Galaxy S10 series, Note 10 series, and Note nine, Samsung is returned with One UI 2 beta replace, this time for the Galaxy S9 collection. To be able to get Android 10 beta, you have to participate in the software however it doesn’t have many seats to be had. Luckily, even in the case, you overlooked out on that, you could manually download and install the replace in your S9/S9+ right away.

See the downloads segment and the step-with the aid of-step guide underneath to find out a way to force set up Galaxy S9 Android 10 update.

How to put in Android 10-based One UI 2 beta update on Galaxy S9, S9 Plus

Warning!

Do not try something given in this web page in case you do no longer absolutely understand what you’re doing. In case any harm happens, we gained’t be held responsible. Ensure you match the version no. Of your tool with the version no. Of the download record.

Compatibility For Galaxy S9 One UI 2

This guide is like-minded most effective for the Galaxy S9 and Galaxy S9 Plus handsets. Do now not try this on another device as you may end up negative your device and permanently brick it.

Backup!

Ensure that you again up all the vital statistics (including images and motion pictures, contacts, songs, films, documents, etc.) on your Galaxy S9.

Downloads

Update [November 29, 2019]: Download hyperlink of S9’s Android 10 beta update introduced!

  • Galaxy S9
    • For Europe/Asia/Australia, unlocked version SM-G960F:
      • Required Android nine Pie replace: Version CSK1
      • Android 10 update OTA (beta 1): Version ZSKD
    • For US models (SM-G960U/U1):
      • Not launched but
  • Galaxy S9 Plus
    • For Europe/Asia/Australia, unlocked model SM-G965F:
      • Required Android 9 Pie replace: Version CSK1
      • Android 10 update OTA (beta 1): Version ZSKD
    • For US fashions (SM-G965U/U1):
      • Not launched but

Instructions

Here is our grade by grade manual to the installation Android 10 OTA replace manually on your S9 and S9+:

Preparation

Step 1. Make sure your tool presently has required the Android 9 Pie update model CSK1 hooked up for your S9/S9+. If no longer, you got to download and set up that. Here’s how to set up the specified CSK1 build:

  • Download the CSK1 update’s firmware from the downloads phase above
  • Install it using our firmware set up guide right here.

Once you’ve got the CSK1 update set up, bounce to the following step to put in Android 10.

Galaxy S9 One UI 2

Step 2. Download the Android 10 OTA Beta 1 document from the Downloads section above.

Step 3. Rename the downloaded Android 10 replace record to update.Zip so that the machine acknowledges the file when you set up it.

Now, use either the ADB method (Method 1) or the SD card method (Method 2) to put in the update.

Method 1: Install the usage of ADB Galaxy S9 One UI 2

After the first three steps in the Preparation manual, the usage of the last steps for the ADB technique below. For the SD card method, study the next phase.

Step 4. Install SDK Platform Tools.

Step 5. Transfer the update.Zip document to the ADB folder.

Step 6. Open a command window into the ADB folder. Here’s how:

  • Open the ADB folder to your PC where you extracted the content of the Platform-tools file.
  • Type cmd within the deal with bar of the ADB folder after which hit the enter key. A command window will open up, and its region will be your ADB folder in which you extracted the SDK equipment and copied the replace.Zip report.

Step 7. Reboot your Galaxy S9 in recovery mode. Here’s the way to:

  • Power off your tool. Wait for 6-7 seconds after the display goes off.
  • Press and maintain the 3 buttons Volume up + Bixby + Power together for approximately 20 seconds or till you notice the recuperation mode.

Here’s what the recuperation mode looks like:

Samsung recovery mode

Step 8. With the cellphone in restoration mode, flow the selection to update through ADB option the usage of quantity keys and select it using the strength button.

Step 9. Connect your Galaxy S9 to your PC now. It’s endorsed you use the authentic USB cable that came with the telephone.

Step 10. In the command window, run the command below to affirm ADB is working o.K.:

    • adb devices

You ought to get a serial variety while doing so. That manner the ADB is running.

Step 11 Install the Android 10 update document. For this, run the command beneath:

    • adb sideload replace.Zip

The replace process will start. Do no longer disconnect your cellphone from the PC now. Don’t energy off the PC both. When carried out, it will restart mechanically but it’s going to make the effort doing so. You will quickly have Android 10 running once it’s miles executed with optimizing apps.

Done!

Method 2: Install the usage of SD card

After the primary three steps in the Preparation manual, the usage of the closing steps for the SD card approach underneath. For the ADB technique, observe the phase above.

Step 4: Make sure you’ve got inserted an SD card into the device (inside the SIM card tray).

Step 5. Connect the tool to PC. Enable File Transfer through the notification on the cellphone so that SD card suggests up on your PC in the Device name under My Computer/This PC display screen.

Step 6. Transfer the replace.Zip document to the SD card.

Step 7. Reboot your Galaxy S9 in recuperation mode. Here’s a way to:

  • Power off your device. Wait for six-7 seconds after the display is going off.
  • Press and preserve the three buttons Volume up + Bixby + Power together for about 20 seconds or until you see the recovery mode.

Here’s what the recuperation mode seems like:

Step 8. With the telephone in recuperation mode, move the selection to use replace via SD card option the use of volume keys and select it the use of the power button.

Step 9. Select the update.Zip report now that you transferred in advance. Confirm on the subsequent display to start the installation.

Step 10. Once carried out, you’ll be returned to the home screen of healing mode. Select the Reboot machine now to restart the telephone.

When accomplished, it will restart routinely but it’ll take the time doing so. You will quickly have Android 10 strolling as soon as it’s miles carried out with optimizing apps.

What about the following Android 10 beta updates?

Well, when you deploy the beta replace yourself, you may should deploy the subsequent beta updates yourself too.

You gained’t receive the following updates through OTA.

Sure, we can be updating this web page with all the Android 10 beta updates here. So, the subsequent time, you will sincerely want to install the brand new Android 10 beta replace and not whatever else.

What about the solid Android 10 replace?

Well, you’ll want to put in the strong Android 10 update manually too, all through yourself.

Also See: For The Latest original ROG Phone finally Asus releases Android Pie

LEAVE A REPLY

Please enter your comment!
Please enter your name here